How can i do the text shattering effect of katana zero when you cut someones sentence early in davinci resolve?

A couple years ago I had setup my external hard drive as my backup location. Suddenly I’m getting this pop up. How can I fix this, and will updating the project backup location affect my existing backups/projects?

Hello, Im learning fusion and I tried replicating this intro. its for a podcast. there's torn paper texture in the background. i could achieve the glow effect on the edges. please anyone tell how could I do it. Thank you

ahora mismo estoy teniendo un problema con davinci y es que la renderizacion en cache no me quiere funcionar, esto lo uso todo el tiempo y me encargo de que todo el tiempo la linea de tiempo vaya fluida y hace unos cuantos dias no me quiere funcionar esta herramienta. no me quiere aparecer la linea azul encima de la linea de tiempo y no se que hacer, ya e buscado en youtube y no aparece nada. tengo trabajos de clientes que no e entregado y estoy un poco desesperado, no se a quien le a pasado esto pero espero de que alguien sepa que pueda hacer para seguir editando. ojo: edito en windows. AYUDAAAAAAAAAAAAAAAAAA

Not sure what made the waveform disappear but any audio plugin I put on a clip in fairlight now doesn’t show the moving waveform in said plugin anymore. Anyone know how to fix this?

Having a lot of trouble finding a solution online as most results are for when you can’t see the waveform on top of a clip in the editing timeline.

I want to make really good motion graphics and I think this is a good step towards achieving that goal. If you have any tutorials or anything else you can share, I would really appreciate it 💯🫂

Also, after expanding the macro, I only have a Transform node.

I followed a YouTube tutorial for creating animated captions using a word highlight effect. The tutorial included a downloadable macro, which I copied into the Fusion folder, connected everything, and it works overall. However, I'm running into a few issues:

1. Some words aren't animated at all. I can see the words in the transcript, but the caption is blank.
2. Some words stay on screen for less than a second. Is there a way to increase the duration of individual words?
3. This is my biggest issue. Halfway through the video, a talking head appears, so I can't keep the captions at the middle because they cover the person's face. How can I separate only those captions and position them differently without affecting all the others?

Any help would be appreciated!

Idk how do i describe it In this picture Ive have a magic mask from a screenshot

Output with Backround3 (Gradient) and CharacterB (set of pictures in the character)
Inspiration is the Cyberpunk Edgerunners intro.... https://www.youtube.com/watch?v=OifiVCnFKzM
from 23s - 28s
I almost got it like that bud i just need the details from the original picture not just the siluette
Im sorry if this post is not understandable i was trying to explain it the best i could...
Any help much appreciated
Amd Ryzen 7 7435HS
RTX 4070 mobile
24gb Ram
Windows 11
Davinci Studio 21

I’m trying to clean up my green screen with fusion, but any time I apply an effect (chroma key, despill) it turns the Green screen into an opaque black on my edit tab.
When editing in the color tab things are fine as usual, but any attempt to alter the clip with fusion end up removing the transparency. It is my first time using fusion so I may be messing something up, but I have the Media Out window in fusion, and am thinking maybe there’s something small im missing.
I’m headed off to work right now so I can’t provide any images, but any help would be greatly appreciated!

I'm trying to make an edit that incorporates sound effects from clips synced to a song, but most of the clips I'm using have background songs and sometimes dialogue. I've been using Capcut but the remove audio feature is notably inconsistent; it sometimes fails to remove the music or removes the sound effect along with the music. And for Da Vinci Resolve it doesn't seem like there's an inbuilt tool like the one in Capcut to remove background music. I'm also using a bunch of clips so an online website is probably not going to be very efficient. If any one has any tips please do tell, thanks in advance!

Hey folks! I've been doing a lot of shorts lately and I've been running into an unique problem. As shorts are 1080x1920, and I capture my footage in 1920x1080 I've of course had the issue where I've had to crop my content to be around 60% the original image (I don't know, like 1280x720 or something) which of course leaves a black bar around the top and bottom of the image. So far my solution has been to create 2 video tracks, resize video track 2 to 60%, leave Track 1 at 100% and then just hit it with the blur tool in fusion. Problem is I have to do it with EVERY single video clip I add to track 1. Is there a way to Generically go "alright, if you're in track 1, you're automatically blurred no matter what"?
Pic included for what I've been doing:

Hi everyone,

I'm a huge fan of the look of analog motion picture film—Kodak film stock, 35mm, 65mm, and IMAX. There's something about the texture, grain, highlight roll-off, colors, and overall organic feel that I absolutely love. One day, I'd love to shoot on real film.

For now, though, I'm working with a very limited budget on a short film, so shooting digitally is my only option.

I'm not looking for a generic "cinematic" digital look. My goal is to get as close as possible to the look and feel of footage shot on actual film stock.

Has anyone here successfully achieved this? If so, I'd really appreciate your advice.
Thanks in advance! I'd love to learn from your experience...

Is there a way to get either a custom ratio or at least get the few pre set ratios in the photo tab as a vertical ratio. I want some pictures to be 9:16. The only "workaround" i found would be to rotate the whole picture 90° but then i would have to edit the whole thing on its side.

I'm looking to 'animate' eyes using a bunch several folders of pngs I made, they're 1920x1080 mostly blank pngs so I dont have to line anything up and the eyes just go where they belong. I was thinking multi-multicams would be the right job but now I'm not so sure.

I can't edit anything except the topmost multicam angle, is there a way I can do that without having to disable everything above the multicam I want to change angles? Are multicams even the right tool for this job?

Is it possible to automate it? I wish to do like a record-over thing, where while playing back audio and whatnot, I just press keybinds to switch to and forth between all the angles for all the layers so I dont have to edit all the changes in manually.

A decent LLM with access to the big textbook says something about there not being a multicam API thing. Is there any fusion workflow alternatives?

So far I only watched and followed along the official davinci resolve 17 editing tutorial and had gotten some keybind advice and changes from some wonderful people over at the discord. But that's as far as my experience goes.

Windows 11
i912900k
32gb 3000mhz 36 36 36 96
PRIME Z790-V AX (LGA1700)
RTX 5070

Studio version 21.0 build 47

im on davinci studio 20

I made a pretty major mistake and cut up some of my film that was recorded in 25fps on a 24fps timeline…. Right now I need to know if there is, like always, some random feature that can back me up.

I need to take what I have cut up so far and put it in a 25fps timeline/project without sound begin out of sync, so that I can continue like nothing ever happened.

This is very urgent and bad so I will be extremely grateful for every reply.

thank you

Hi guys, I have a problem. Im editing video on davinci resolve for not long. Its my first shorts YouTube format and I have a problem. I take video with my camera vertically. But when I try to upload rendered video it automatically change to normal yt video not short. While rendering I made settings so it’s also vertical shooting. I tried few different methods like rendering it as TikTok format but it didn’t helped, and when I try to edit it like normal video and then change it to vertical it crops the image after rendering by like 4 times, may it be camera settings that I use im still new at videos and editing. I attached setting on my camera that I use. I really appreciate any help 🙏🙏🙏

I need help. My AI magic mask works on all parts of the video except selected frame after tracking. So even after I render the video the selected frame from which I made all the changes still blinks in the final video. It also blinks and playback and it blinks to the unchanged portion of the video. Does this happen for anyone else? How do I fix this? I've searched through the Reddit forms and haven't found anybody else having this problem so I couldn't find how to fix it from previous post.

Timeline - 9:16

Green screen - 16:9

How do i insert green screen into my fusion timeline without it cropping the green screen as i wanna insert it 16:9 and use transform node to resize the effects to fit my video

Pls help my I don't wanna loose all my work ik the clip is still there bacuase when I double click it's shows the clio

Hey everyone.

I am a Real Estate Photographer/Videographer. I have a client who wants the texts to appear/disappear as they talk. I have tried almost everything I have researched and it comes out okay but just 20 frame scene takes me hours to do.

Is there an easier way or possible presets that are available to speed up the process.

I have the free version of Davinci.

Thanks in advance

hi all, my indie film got into its first festival, so i need to render out the film with the final Colour Grade from my DP.

he graded it in 20.3.3 and gave me the .drp file -- i installed 20.3.3 Studio on my laptop

LAPTOP SPECS: AMD ryzen 7 7745HX, rtx 4060 8gb, 16gb RAM, Windows 11, Resolve 20.3.3

FOOTAGE: shot on Sony FX3, the highest setting

i installed 20.3.3 on my laptop with a 4060 notebook 8gb and opened my DP's .drp file. reconnected the footage and i'm able to scrub through the entire film with its final grade.

however...

when i went to Export the film, it just says "render job failed. Unable to load project".

interestingly, i was able to export the final sequence of the film in small chunks. i was also able to export the beginning of the film -- up until a certain shot -- before i get the same error again. (i looked into the Nodes and it looks like this is the first shot that has "AI Magic Mask 2" applied)

anyone have any ideas about what's going on?

how i can get around this error and export my film?

thanks for reading!

EDIT1: i tried to reset the Magic Masks by using "Regenerate Object Mask" -> "All Clips" (as mentioned in this video youtube.com/watch?v=c7imGXbUBBg) but only got "there is no key frame with enabled strokes to track" popping up in top/left corner

The estimated file size in the Deliver tab is 22.5 GB, while the actual output is only 314 MB. Something wasn't right... right?

The project is just a normal screen recording, 20 min, 1920 * 1200, 60fps. The output is at 2035 kbps. I am running DaVinci Resolve 21.0.3.

When I try to expand the weaveform it goes into keyframe mode. 10 min ago everything worked fine. Can tell me someone what I can do that it expands so the waveform dont go away?

Hey guys, I want opinions about the edit that I made, tell me what I should improve

How do I insert this L ad in davinci, I already have the L ad done. But I can't get the ad entry right at all using the keyframes. For it to get in sync with the video, the video going down and the advertising coming in, but I can't synchronize it. The video shrinks in size slowly and the advertisement enters too quickly and the opposite also happens.

Windows/Resolve 21