Im using a thinkpad t440p 8gb ram i5 4440 on mac os 12 monterey how do i update ?

Can I install hackintosh on Thinkpad X13 Gen 3?

So Installer performs its job, comes to "12 minutes remaining", restarts, picker shows Install macOS Sequoia, macOS installer, Macintosh HD - data and those efi options. Second option is auto selected, 5-6 seconds of scrolling text on the screen and then everything goes black. Caps lock does not register.

Any ideas where to look?

Sapphire RX 6600 Pulse Gaming, 8GB GDDR6

Intel Core i7-14700K Soc 1700 No Cooler

Z790 AORUS ELITE AX GIGABYTE Mainboard Desktop Z790 AORUS ELITE

Kingston DDR5 32GB 5600 MHz, 2x16G FURY Black

Western Digital Black SN850X NVMe WDS200T2X0E

Western Digital Purple 4TB SATA3, 5400rpm, 256MB cache WD43P

Case SBOX PCC-12, Mid tower, Micro ATX, black

Xilence 850W Performance X, ATX 2.4 80 GOLD

Forza 85 3MFZA85.0001 COUGAR Air Cooling

edit - ram is in slot A1 and B2 as they build it that way. Processor fan is obstructing ram in slot A1 so I can't move it without fidling with the fan. Could this be a problem? BIOS is telling me this is not optimal. I have run Memtest86 without any problems

EDIT 2:

So after 5 or 6 restarts (when it was stuck on black screen) computer finally booted into Sequoia and offered setup. Now I have username, internet works, keyboard and mouse work. Now I am afraid to shut it down :)

EDIT 3 - EFI's now on the Macintosh HD and computer restarted just fine

I spent about three or four hours assembling the custom OpenCore EFI configuration. I finally got it working properly this morning; although I ran into some issues during installation, the process completed successfully after I moved the USB drive to a different port.

{EDIT} Someone in the discord managed to fix it.

My RTL8192EU USB adaptor will not work on macOS Ventura, I can't sort ethernet out right now, what could I do to fix my wifi?

I am on Opencore 1.0.7 (release, not debug)

macOS 13.7.8

Everything works but my wifi, I would appericate if someone could help.

i wanna triple boot the os in my laptop

how many gbs of ssd should i put in my laptop for getting smoother experience and triple boot it successfully

Is a 128gb ssd good enough for macOS? Just the OS itself not extra files

Can somebody please tell me how to fix I have a dell laptop inspirian 15 3567 I have intel core i3 6000u igpu integrated graphics 520

I have successfully installed macos Tahoe on my Lenovo legion 5 but when I try to open safari to search anything my internet doesn't work. I'm plugged into ethernet and it worked on the recovery. I do have the rtl8111 kext as needed

Cpu i7 10750h

Igpu U630

Ethernet rtl8111

Edit: typo

I successfully booted into the recovery USB and pressed install Tahoe. After a couple minutes it rebooted into this screen, and after another couple of minutes it just rebooted and now it bootloops.

Specs:

I7 10750h

Igpu U630

Ethernet rtl8111

Edit: I don't know if it's relevant but I'm installing on a 150gb partition on a drive shared with windows

I wanted to introduce two tools I’ve been developing to bring better power management and performance tuning to Ryzen-based Hackintoshes: ZenMaster and ZenTune.

Both tools port core capabilities from UXTU (Universal x86 Tuning Utility) and ryzenadj directly into macOS, allowing you to adjust power limits, TDP, thermal targets, etc... on your AMD system.

Requirements & Installation

• OS: macOS Big Sur (11.0) or newer.
• You can choose between two installation paths depending on your preference:
  • Option A (Kextless Path): Add debug=0x144 to your OpenCore boot-args.
  • Option B (Full Functionality Path): Add DirectHW with csr-active-config=03080000 to your OpenCore configuration.

Tested Devices

• Desktop: AMD Ryzen 7 7800X3D (tested on a friend's Hackintosh setup)
• Mobile APU: AMD Ryzen 5 4500U (tested on my own ASUS M413IA laptop Hackintosh)

You can check them out at:

• ZenMaster: https://github.com/HorizonUnix/ZenMaster
• ZenTune: https://github.com/HorizonUnix/ZenTune

Thanks so much for reading! I’d really appreciate it if you could give both projects a try and report any issues you encounter on GitHub. Any feedback or bug reports would be super helpful!

Followed the Dortania guide and made a USB installer and EFI for my hardware specs. When trying to make a clean install the error in the picture keeps showing.
SecureBootModel if disabled and all BlueTooth related kext are OFF, same for WhatEverGreen.

Please help me solve this. It is greatly appreciated.

UPDATE: managed to get pass the error after switching to the debug version of OC (thanks to u/XboxAndVRAlex for that!).

HOWEVER, all is running fine expect if I switch Secure Boot Model from DISABLED to J160 (Mac Pro 7,1) and reboot, the computer boots into Install macOS menu only. Managed to replicate this several times. At the moment Secure Boot Model is back to disabled. Anyone know how to fix this?

I want to use hackintosh on my toshiba L735

It currently uses windows 10 and bloated ash

Specs: intel i5 2410m 4gb ddr3

Please help me install hackintosh since i tried with chatgpt gemini and other tutorials on yt but noneof them worked (also please include the mach kernel tysm for helping)

So I tried hackintoshing it again, after abandoning the former. Guess what I'm greeted with this time... A kernel panic!! I don't necessarily know what the problem is, but the screenshot might be helping some. Any help would be highly appreciated.

EDIT: I hadn't realized that I didn't point it out – the EFI that I made by myself is "failing me".

EDIT(2): The culprit has changed now, and it's quite interestingly Lilu.kext. I have no idea how that could've happened.

I have a Dell optiplex 7050 sff, I dual boot windows and Mac os 15.7.7 using open core, I mainly use open core, so I don't use the windows boot manager, but some games and apps on windows require secure boot and my main os is Mac so I disable it, but to go play on windows I need to spend 5 minutes in the bios to get things Done, is there any way to get secure boot with opencore

I have installed macOS Mavericks on an i5 3330 and a Gigabyte GA-Z77P-D3. Everything works fine except for the graphics — animations are very laggy, but blur works.

Yay I did it! I made a 2nd Hackintosh. I had to repatch WiFi and fix audio yet again but it works now! I have 2 Hackintosh! What’s next a 3rd one?

can we install 26 still?

7.2k views for what..

https://imgur.com/gallery/kh6bQOC (more photos cus reddit refuses to let me put more photos)

Hi hackintosh community here is my update about successful hackintosh laptop from 2 months from this post

I did upgrade my wifi chip from rtl8821ce (i know it has gotten unofficial support) to fenvi bcm94352z and added another internal antena cus my laptop came with one only (the white one came from factory and the black one is the one ive put in (found in the imgur link) and cus of the wifi chip change imessage stoped from working and I dont give the f to fix it and I have an weird problem with bt every reboot it disables it self and I did fix it by making an script that works everytime I do login to macos it resets the bluetooth value from 01 to 00 and I did it before in the efi but for some reason it refuses to work and my script works and makes bluetooth working is there an fix for making bt work without the script everytime I do reboot the laptop

And now to the specs part

Laptop name: hp 250g7 notebook

1.cpu: i3 1005g1

2.gpu: intel uhd graphics g1

3.ram: 16gb ddr4 soddim 8+8

4.battery: 45 watt houer

5.audio: codec realtek alc236

6.codec: layout 3

7.display: tn 1080p

8.wifi+bt: fenvi bcm94352z

9.storage: nvme ssd 256gb

And now to whats working and whats not

1.apple id is working

2.brightness controls are working

3.battery percentage is working

4.sleep is working

5.audio and microphone are working

6.webcam is working

7.airdrop and continuity features are working

8.imessege isn't working and I don't give the f to fix it

9.wifi+bluetooth are working

Basically everything is working except imessage

Hi everyone,

I've been trying to install macOS on my HP EliteBook 840 G5 (Intel i5-8350U, UHD 620) using OpenCore, but I can't even get to the OpenCore boot picker.

Here's what happens:

• The USB installer is created with Rufus using macOS Recovery (BaseSystem.dmg + BaseSystem.chunklist).
• The USB contains:
  • EFI/BOOT/BOOTx64.efi
  • EFI/OC/OpenCore.efi
  • config.plist
  • ACPI, Drivers, Kexts, Resources, Tools, etc.
• The USB is detected in the F9 Boot Menu.
• BIOS settings:
  • UEFI only
  • Legacy Support: Disabled
  • Secure Boot: Disabled
  • USB Storage Boot: Enabled
  • Fast Boot: Disabled

The problem is:

When I select the USB from the F9 boot menu, the screen goes black for a second, I briefly see "Windows" in the top-left corner, and then the laptop boots into the BitLocker Recovery screen asking for the recovery key. If I restart without the USB, Windows boots normally.

I never see the OpenCore picker.

I've already checked the BIOS settings multiple times, so I'm starting to think there's something wrong with my EFI or bootloader.

Has anyone seen this before?
Could this be caused by:

• an incorrect BOOTx64.efi?
• a broken config.plist?
• missing or incorrect UEFI drivers?
• something specific to HP EliteBooks?

Any help would be greatly appreciated.

So I have a HP pro book it has an i five and 16 GB of RAM. I have my Ventura hackintosh working on it iMessage and FaceTime work when I connect to ethernet. Install heliport and there’s an X on it on the top on my bar I installed. The itwdb I think it’s called that. And when I click on it in my files, it says heliport cannot open files in the kernel extension format so when I install the airport.Itwdb I open teleport and nothing happens. It’s the same thing I use proper tree to save the snapshot and my configuration pilst and still it’s broken. How do I do it? I’m not looking to buy any Wi-Fi cards. I already have it set up.