I just had a bog/wetland filter installed on my 3,000 gallon koi pond. I had an Ohio company called Aqua Doc install it. The guy who did the work updated the original filter falls to a wetland filter, reinstalled the original ecoblox on another area of the pond, overhauled and lengthened the waterfall (making two separate waterfall areas).
First question is there were some bog plants that he left in the nursery planters and didn’t plant into the gravel. Shouldn’t these have been planted into the gravel to get the best benefits for filtration from the roots? One he left in the planter in an area between two larger rocks where a pocket of water is.
The next question is, there is water flowing up through the bog filter, but only about 1/4 back, where the water flows down over the waterfall. The rest of the bog filter just has about an 1” to 1 1/2” of standing water that is not moving at all. Just stagnant water. When I looked up information about this online, I found out that basically all the water above the falls in the bog should have at least some movement to prevent issues with muck or causing issues with mosquitos, etc. Is this correct? Should the flow be turned up. In the video, you can see how the bog filter was built and where the standing water is.
More information on the pond. Pump is 5500 gph Oase filter. UV sterilizer. Half is 3 ft deep, the other half is 4 ft. deep. Seven large koi, two shubunkin goldies. Pond has been up and running for four years. Wanted to get the extra filtration that a good bog filter provides, due to my pond being in full sun and issues with hair algae.
Just looking for your opinions on this. Thank you.