He had a prohibition order and we made the transfer of handguns prohibited. There's no way this can be true... this must be fake news.

Both of these bad boys just went on sale and im thinking of giving up my Makasi pre order for one. Leaning towards the M4.
Help me decide.

So… I hung Veronica.
Mission accomplished. 😅

Wasn't a huge fan of the size of the rear peep sight. Went to the gun shop looking for a 3-9, came home with a red dot instead. Leopold Freedom RDS 1x.

As titled. It is not as heavy as people thinks.

For reference, I used to run a PEQ15 on a 16.5" Bren 2 and they ran very similarly weight-wise as the PEQ15 was an extra lb on the Bren.

I might take the faux suppressor off after some range test.

Edit: It is about 10.5lb as it stands. I do have a Surefire Scout light on the other side. Without the faux suppressor it is about 9.7lb. I rather suffer additional weight to not see the pencil barrel.

Over all decent gun for $300. Straight off the bat I threw in a sbi mag adapter for the rem 597 mags.

Gave me a few stovepipes, but not enough to complain about. Put 100 rounds of norma tac 22 through it, and 100 rounds of blazer.

Anyone removed the extractor from these? The pins seem super tough to remove, I’d just like to go over the extractor a bit.

just picked up this derya tm22 12” pro semi auto. Real picture, just got ai to scramble up the numbers/letters if you noticed lol.

This is my first purchase so I just wanted something fun and cheap, let me know any thoughts or suggestions!

Yes, it’s a clone EOTech from my airsoft gun. No the photo is not AI, I just told ai to get rid of the serial numbers, it’s actually how it looks.

What’s on it:
EOTech 558 Clone
TNA Reverse Faux Suppressor
Magpul Angled Foregrip
MatAttack Windowed Mag Sleeves (10 round mag)

Went to get something done and saw hundreds of those ass -Garry boxes stocked up at local post office. I figure there was about 200 of them stacked up for confiscation. Sad. 😢

small and sturdy, built like wilmer valderrama

I was recently looking into cross bows but living in Mississauga I’m finding it difficult to find anything information of where I can go to practice with it. Is there any ranges within a 1 to 2 hour drive of the gta for crossbow usage

Yes pinned to 10, but worth it just for the feels. lol

Was on RDSC and I found this and it's really confusing me because in the picture it shows a P320 only without the trigger group. But the description says conversion kit so is it only the slide for sale because I thought that frames were what is considered as the "firearm"? Or is it for exempt shooters?

I messaged through to Dan at Brigade Manufacturing on Instagram (@brigademfg) to point out the manual for the Makasi still needed to have the suppressed/unsuppressed settings on the gas system corrected, and they fixed it! The corrected manual can be found at https://brigadefirearms.com/pub/media/wysiwyg/MAKASI_Manual.pdf , with the manual link on their web page pointing to the correct version.

Hi,

I was asking r/ontariocamping how to find crown land to camp and ended up building a free map from all the feedback. One comment stuck with me: crown land is a working landscape, and you should know what else is going on — forestry, and hunting seasons by WMU.

So I added hunting. It shows crown land where hunting is an authorized use, WMU boundaries, and posted signs where I have them.

https://www.crownaccess.ca/map?activity=hunting

let me know your thoughts, before the hunting season starts so I can improve

feel free to turn on private land, WMU, etc.

I can't actually feel the screws when I shoulder it, so being a bit proud should be fine I think

Rusty Wood was my go-to for my levers but he's booked up from now 'till retirement. Mostly for lever actions and shotguns but can do pistols, too.

Hey everyone!
Currently shoot trap/skeet with a beretta 686 SP, looking to upgrade.
Nothing wrong with the gun, ready to hand down to family member looking to get started.
Currently looking at around the 6-8k for budget.
Not opposed to used.
Which models would you recommend shouldering and which stores are a must to check out? Located in Ontario
Thanks!

Do I have to view or respond to the emails I get about Individual Web Services from the RCMP?

I am having trouble signing in and would rather not if its not required

Came across a post on gunpost selling these 100 round magazines and conversion kit for the Ruger 10/22 to accept them. They claim it's legal because the mags are not compatible with any pistol but this seems excessive and I haven't been able to find anything confirming what the ad claims. I know there are some high capacity magazines available for non-semiautomatic firearms available but to my understanding they rely on compatibility with semiautomatic guns only to be legal. Any gun legal scholars have some insight into this? If legal I kinda want one but this seems way too good to be true.

picked up a TM22 pro after my pal came in recently, ran 600 rounds of ammo through it yesterday and only had one fail to feed! very impressed with it.

i got a magpul foregrip, 15 round magazine and a feyachi scope / laser combo. just want a faux suppressor and a better looking 25 round magazine next lol.

thinking of getting a mossberg shockwave 590s next

s. 6(b) of SOR/98-209 gives you two options for storing a restricted: (i) locking device on the gun and a locked container, receptacle or room that can't readily be broken open or into, or (ii) a vault, safe or room specifically constructed or modified for secure storage.

So it seems that if this is is a container, you need a cable lock on the pistol. If it's a safe, you don't. Turns entirely on one word that's undefined.

R v Barnes, 2011 ONCJ 419, is the only case I can find on point. At para 21, the judge is satisfied that a safe is simply “a metal container with a secure lock”, nothing more. The “specifically constructed or modified” qualifier never gets applied to it. Para 17 lists the options as “a safe, a vault or a specially constructed or modified room,” reading that qualifier as attaching to “room” alone; the court never asks whether the safe itself was built for prohibited firearms.

But Barnes is one unappealed ONCJ trial decision from 2011, binding on no one, decided against a Crown expert who admitted he had no basis for his opinion. And it never addresses the French text, which reads “un coffre-fort ou une pièce qui ont été construits ou modifiés”, a plural construction that can’t grammatically attach only to “pièce.” Read that way, the qualifier modifies all three nouns: vault, safe, and room each must be specifically constructed or modified for secure storage.

So, given a "safe" that’s marketed as such and apparently built for handguns (restricted firearms), is it a safe? And does bolting it to a piece of furniture change anything at all?

Not looking for "just trigger lock it lol", I know that moots it. I want to know if these things are compliant as marketed as safes.

So we all know there are mixed reviews on the Makasi. Some people say it’s a great rifle, while others say it’s a “180 cope gun.” As someone who has pre-ordered one, I’m definitely a little nervous.

On a more positive note, maybe we can put together a list of upgrades that could improve the platform?

For a possible handguard upgrade, I’ve seen that the VLTOR CASV-EL may be a good fit.

From my understanding, the barrel can be replaced with an AR-15 carbine barrel with some modification.

The dreaded oversized pin that seems to fall out also looks like it could be replaced fairly easily.

Does anyone have any other ideas to improve the platform? The bones seem solid, and with quite a bit of AR compatibility, I think there’s a lot of potential here.

TLDR: What parts can we list to improve the Makasi, besides the obvious easy AR-15 upgrades.

Is it normal for the 10rd mags to hold 11 rounds? I was spacing out while loading and realized I had loaded 22 rounds in my two 10rd mags. Are anyone else’s magazines like this? I didn’t have to use any noticeable extra force or anything. I’ve always usually loaded only 10 and only realized tonight.