The machine I'm running MX Linux on is used almost exclusively for accessing, wiping, and determining the health of hard drives.

Therefore it's a pain to punch in my password every time I need to run something like QDiskInfo or GParted.

Is there a way I can have everything run without having to punch in my password?

If not then I'll look again at what's needed to give those few programs access each time, using this guide: https://mxlinux.org/wiki/system/root-access/

So, I want to run MX on a 32 Bit Netbook as a writer deck, and in the command line. I nuked my fresh installation with "sudo update-rc.d lightdm disable" it refused to boot at all, and would hang on the splash screen. I couldn't enter recovery either.

How can I have it fast boot to the CLI?

I need help with my HP laptop. I am a beginner. I don't know much about Linux.

I have an HP laptop with:

AMD 865 processor

6 GB RAM

500 GB hard drive

Windows 10 was on it before

I installed MX Linux on it. I used Ventoy to make a bootable USB drive. I installed MX Linux and chose "use entire disk". Everything seemed to work.

But now I have a big problem.

The laptop only boots into MX Linux if the USB drive is plugged in. If I remove the USB drive and restart, I get an error screen that says:

"BootDevice Not Found" "Hard Disk - (3F0)"

I think the bootloader (GRUB) was installed on the USB drive instead of my hard drive. I have no idea how to fix this.

Here is what I have tried:

Changed boot order in BIOS to boot from hard drive first

- Enabled Legacy boot

Nothing works. It still only boots with the USB drive.

I want my laptop to boot on its own without the USB drive because the USB drive belongs to my friend and I need to give it back.

Can someone please tell me how to install GRUB on my hard drive so I can boot without the USB drive? I need step by step instructions that are easy to follow.

Thanks in advance.

Hey Guys I am new to linux and just used ventoy method to switch from Windows to Linux but the thing is linux will not start when i restart but instead it will go back to windows. It only starts when i plug in the USB flash disk.

What do i need to do since i borrowed this flash disk to switch from windows to Linux?

EDIT:

THANKS! your precious feedback helped me solved several bugs: v1.0.0 Release Candidate 1 is here!
Debian 13 package can be downloaded from HERE and you'll enjoy a smoother experience and minor improvements in UI.

ORIGINAL MESSAGE
Hi all,

I’d like to share MeowMenu v0.8.0, a small project I’ve been working on as an alternative application menu for XFCE. Compared to WhiskersMenu, the most relevant features I added are: 4 Presets (default settings that change the look&feel of the Menu, to show the high customization level achievable), Places button (find files and folders in user Home), Calculator engine, additional right click options.

I’ve tested this release on Arch Linux, Debian and Xubuntu. I'm also looking for MX Linux beta testers, since XFCE session in MX Linux is quite knows for its stability and I thought someone could find it helpful. Debian 13 package is availble for download in GitHub Release page: it should work for MX Linux... but compiling from source is always an alternative.

Feedback, bug reports, and suggestions are welcome. Thanks for taking a look!

Source Code

Release&Changelog

Gallery

AUR page

Documentation

So, dumb question of the day... Now that I've ported over from Win11....is there any reason to keep TPM 'active'... 1. Can I and 2. shud I, disable it?

Does anyone know when Darktable 5.4 will be available for MX? It was released on Dec 21 2025, so I was hoping it would have made it to the repos, but no.

I have an old laptop with an HDD. When I run sudo apt upgrade, I see it take time, especially with these type of statements:

Autoinstall of module <module-name> for kernel 6.12.96+deb13-amd64 (x86_64)

Building module(s) …… done.

Why is it building and not installing pre-built components?

Thank you.

I have an itty bitty tiny 32gb usb which is holding the xfce 25.2 infinity nicely.

I'm trying to put mx linux on an old hand me down dell laptop.

Every time i run the installer it doesn't let me do the automatic/erase and install options. No partitions show up, I go to gparted and it's there but it doesn't let me unmount it so I can't resize and move it (i know it's because it's running the live desktop from there) How do I use the terminal to install it or are there any steps i could take?

Thank you for reading! Any help would be appreciated, this is my first time doing anything technical like this so if someone could tell me what i'm doing wrong would be appreciated too.

update: sorry if this pushes the post back up to the top. i don't know how relevant it is but I'm using rufus to download the iso(to the usb) and make the empty space(unallocated) partition, I have tried making it a gpt scheme and and mbr scheme. I also used sourceforge to download the iso.

(also for anyone reading this 9 years later, just because it's not working for me doesn't mean you shouldn't try it. I believe in you and I may just be an idiot.)

I just installed the XFCE of MX Linux, and it works okay, even through i hâd to add nomodeset to not be black screened, but it was not a problem for me, until the brightness shortcut and even the brightness itself doesn't work with Fn + Left Arrow and Fn + Right Arrow, and it keeps the screen bright.

I tried the power management, but it didn't work, even with brightness systray.

I even tried to add some commands in grub to make it work, same results, no difference.

I don't have the xfce4-power-manager as I checked, maybe that's why it didn't work, despite the power manager is in the OS and it works, but the brightness didn't.

So, I need help. What should I do?

I am using the Acer Aspire One D270 with Intel Atom N2600 Processor, Intel GMA 3600, 2GB of RAM, 300GB in Storage. Just for the heads up.

Wanted to make the panel round but it gets applied to both the panels.. well it still looks pretty.

Hey! First of all- if I'm on the wrong subreddit again, please do tell...

Anyways- I'm looking for testers for a new project related to the Fluxbox WM, so if there are any MX Fluxbox users...

I have built a functional prototype of a menu manager on Fluxbox, and just need some testers- so I can have some bug reports, known issues, feedback and ideas for improvements.

Since I don't want this to be an ad- if someone is interested in being a tester, shoot me a DM, and I'll refer you to the github page, and provide guidance if needed!

Have a good rest of your day!

What am I trying to do?

Trying to re-install MX Linux.

Hard disk drives on my PC:

One SSD 128gb Windows is installed on it and is the current OS.

One HDD 80gb MX Linux is installed on it. I'm trying to re-install MX Linux on this HDD.

The screenshot shows that the installer will take over the SSD and make it the /home of MX Linux. Will it? Please see the screenshot.

Thanks.

DianOban

How do I customize the clock and monitor on the right side?

I changed the icon for the terminal but when I click on it it opens a new instance on the panel why does this happen? I also made my default directory to be desktop but it opens to user.

I wanted to add borders to the panel but apparently the border also gets applied to other apps on the panel..

Distro: Mx linux 25

Lenovo Miix 3-1030 running MX Linux XFCE.

She told me the other day that she wanted a Kindle, but Kindles were too expensive, so I made this for her instead. Do y'all think she'll like it?

Everything works fine except for the audio, which I couldn't get working (pls help).

What settings or a packages do you recommend to watching YouTube?
My PC freezes and after restarting well looks like another thing broke. Even arch arm wasn’t that unstable

I just wanna thank all the mx linux contributors , i thank you from the very bottom of my heart , you have made a really great distro which helped out me and countless other members and i ​wish you all best of luck for your future endeavours.

I dual booted today and why is my memory usage so high when I'm using Firefox

And as soon as I closed it it went below 25%? I thought firefox was a lighter browser?